Zhejiang Canaan Kaixinlong Technology Co., Ltd.
Canaan Kaixinlong, Focus on automatic capsule filling machine
Add to Cart
Overview of the machine:
Capsule Filling Machine Manufacturer Powder Capsule Filling Machine Hard Capsule Filling Machine Filling Machine
Technical parameters:
| Output | 800Capsules/min |
| No.of segment bores36 | 6 |
| Suitable fof capsule | 00#-5# |
| Total power | 4.5Kw(Standard configuration) |
| Overall weight90 | 1000Kgs |
| Overall diemensions | 840(+339)mm×820(+339)mm×2000m |
| Noise | ≤75DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤6m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Orientation of the empty capsule:
Cleaning station:
| Use The cleaning unit cleans the module for access to the next cycle. Principle When the upper and lower modules are dragged under the main working plate and parked at the cleaning station, they are placed at the gap of the cleaning device. At this time, the compressed air is opened, and the powder in the mold hole and the broken skin are blown out of the mold hole from the lower direction of the lower module. The vacuum suction system placed above the mold hole draws it into the vacuum cleaner to keep the mold hole clean and to facilitate the next cycle operation. | |
Material feeding method:
| | |
| Manual feeding | Lifter feeder(option) | Vacuum feeder (option)
|
| 1.Add the material to the hopper manually. 2.Large dust, high labor intensity. 3.No cost, to adapt to the smaller batch production | 1.Through the transition feeding pipe, with a soft connection. 2.The feeding process is closed, no dust overflow, safety and health. 3.Adapt to the mixture of materials, can control to solve the problem of material stratification. | 1.Compact structure, tight, no dust pollution, safety and health, low noise. 2.Simple installation, easy to operate, the transport is well adapted to the requirements of the filling machine. 3.Applicable to the 2.7m storey-high clean workshop. |
Closed station turntable:
1.Use the imported silicone sealing ring to reduce the condition that the powder is brought into the turntable due to the expansion of the movement axis, and smooth operation, high accuracy;
2.It solves the complicated problem of installing and dismantling the mold, reduces the labor intensity of the staff, and strengthens the service life of the station rotary table.
Copper collar:
| 1.Hard column: stable particle weight, loading amount close to the maximum value, one or two groups of filling rods have obvious beating, the adjustment range is too small, the machine load is large, the corresponding parts wear fast. 2.Soft column: stable grain weight, large adjustment range, small load, small wear of parts. Half column: sometimes appear puff powder particle weight and light. 3.Scattered sand: leakage, dirty machine table, installation difference. The gap type copper ring can be replaced with the sealing type. |
| According to the material situation, the company provides the optional replacement copper ring |