The CFK-1250 series capsule filling machine designed and produced by our factory has been improved and innovated for many times in the original models, which is the preferred equipment for hospitals or small and medium-sized pharmaceutical factories, replacing the original semi-automatic capsule filling equipment.

The whole machine adopts intermittent rotary mechanism and quantitative dose filling. Suitable for 00 # -5 # capsule powder and pellets filling, and can be selected with automatic bag delivery machine, vacuum feeding machine, gold inspection machine, polishing machine, hoist and other auxiliary equipment.

Technical parameters:

Output	1250Capsules/min
No.of segment bores	9
Suitable fof capsule	00#-5#
Total power	5.6Kw(Standard configuration)
Overall weight	1200Kgs
Overall diemensions	1085+(435)mm1015(+252)mm1880mm
Noise	≤75DB(A)
Pressure	0.4 ~ 0.7Mpa
Air consumption	≤6m³
Vacuum	-0.03 ~ -0.06Mpa
Filling error	±2.5%~±5%

The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.

Sort of empty capsule:

principle

The seeding tube is equipped with multiple circular holes and communicate with the capsule hopper, and the channel is equipped with capsule tablets.

The seeding sac tube slides up and down to drop the empty capsule into the pore channel. When the seeding capsule tube goes up, the capsule piece will jam the capsule. When the seeding tube falls down, the capsule holder rotates and drives the capsule to release the capsule, and the capsule falls out of the hole.

5.6Kw Pharma Automatic Capsule Filling Machine Standard Configuration

Orientation of the empty capsule:

Broadcast description

The capsule head always acts in the middle of the capsule body, and the capsule head pushes the capsule to make a U-turn movement, which always pushes the capsule body to the edge of the capsule comb, and then presses the capsule head down to turn the capsule over and push it vertically into the module hole.

principle

1. The thrust point of the capsule head is on the capsule body;

2. The width of the chute is smaller than the outer diameter of the capsule cap, which is larger than the outer diameter of the capsule body. It only has a tightness effect on the capsule cap and does not contact with the capsule body.

Orientation of the empty capsule

Product Tags:

5.6Kw Pharma Automatic Capsule Filling Machine Standard Configuration

Automatic Capsule Filling Machine

Automatic Capsule Filler

Hard Capsule Filling Machine

Pharmaceutical Capsule Machine

Pellet Filling Machine

Powder Capsule Filling Machine

High Speed Capsule Filling Machine

Medical Capsule Filling Machine

Automatic Tablet Press Machine

High Speed Rotary Tablet Press

Auxiliary Machine

5.6Kw Pharma Automatic Capsule Filling Machine Standard Configuration

njp 1200 capsule filling machine

capsules filling machine manual

hand operated capsule filling machine manual