Zhejiang Canaan Kaixinlong Technology Co., Ltd.
Canaan Kaixinlong, Focus on automatic capsule filling machine
Add to Cart
High Speed Capsule Filling Machine Pharmaceutical Equipment Capsule Production Equipment
Technical parameters:
| Output | 7500Capsules/min |
| No.of segment bores | 54(four rows) |
| Suitable fof capsule | 00#-5# |
| Total power | 18Kw(Standard configuration) |
| Overall weight | 4000Kgs |
| Overall diemensions | 1884+(530)mmX1404+(275)mmX2148mm |
| Noise | ≤80DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤18m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±3%~±7% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Rejection station:
| Use Some empty capsules may keep the body cap still for some reason, and remain in the upper module hole; to prevent mixing into the finished product, they are removed before the capsule is closed. Principle A push hand that can reciprocate up and down, located between the upper module and the lower module, with a thimble hand. When the upper and lower modules rotate, the push hand stops at the lower limit position and the thimble breaks away from the upper module. When the module stops at this station, the push hand goes up and the thimble mounted on the push hand is inserted into the upper module hole. ①. If there is a pulled out capsule cap in the upper mold hole, the upward top has no impact on the capsule cap. ②. If there is an open empty capsule in the upper mold hole, the upper module is pushed out by the upward thimble and sucked into the air chamber. | |